Let’s Recognize This New Power Tool!

Let’s Recognize This New Power Tool!

With the invention of new technology in the field of special power tools for the shoot that is Bostitchf21pl, then this time is not the time anymore by using technology with gunpowder system, is the era with gas technology system. By using this gas technology system very many advantages gained to the work and the operator itself.

At the time of admission to the concrete, due to the pressure of the spikes that enter the concrete will arise heat in the extreme, this is what resulted in the spikes in the concrete with a very high gate once. In order for the recording results in accordance with the expected and maximal there are some recommendations that must be considered, namely:

a. Distance to the edge
The minimum distance to the edge should be greater than 75 mm from the edge of the concrete, otherwise, it will lead to cracked concrete so that the nail strap is not firm.

b. Minimum distance between spikes
Installation of one nail with another nail should be arranged in such a way as to avoid the occurrence of cracking of concrete during the installation of a shoot. This condition is not permitted near distance recognition, the minimum distance between one nail and another is recommended minimum 50 mm, if the distance is less than 50 mm, possibly will result in cracking of concrete.

c. Concrete thickness
The thickness of the concrete is very important to be considered to obtain a good work of recognition, in the sense of optimal recognition alignment. In general, the thickness of the concrete must be thicker than three times the minimum thickness of the penetration of the shot used.

If the thickness is thinner than the above provision (concrete 3 times thicker than the penetration of the shoot) will result in compression strength at the point of recognition may result in cracking of the broken concrete surface. And this may pose a danger from the reflection of spikes of broken concrete and will also reduce the power of the recognition grip.

In addition, this tool can also be used for the recognition of steel. However, due to the flexibility of steel will give the effect of the clamp on the installation of nails that will be installed in the steel TSB. In addition, the extraordinary heat generated by the effect of stiffening, causing welding and clipping effects results in maximum grip strength.

Comments are closed.